Shear spray lubricant

Description
Glassmax E 4 is a new generation biodegradable non toxic shear spray lubricant. The renewable vegetable based ester is providing the best performance when it is diluted in water with a hardness of less than 50 ppm of CaCO3.

Application
Glassmax E4 is used for spraying on the glass drop cutting scissors. When the emulsion is made add the product to water, never add water to the oil. Stirring is required to create a stable emulsion. pH should be between 7.0 and 8.5. It is recommendable to add a biocide once in a while in order to avoid fungus formation which will cause blockage.

The recommended dilution ratio is 0,1% (1 part Glassmax E-4 to 1000 parts of water). The dosage however depends on the quality of the water and the recycling system.

It is recommended to use deionised water rather than water with a softener, especially when recirculation systems are used. The recommended water temperature has to be between 15 and 40°C to warrant a good emulsion quality.

Benefits

• Biodegradable
• Easy to emulsify even with water having 40 HF
• Stable to heat and stable pH
• Economical: use 0,07-0,2%. Initial recommended level is 0,1%
• Free of mineral oils
• Excellent lubrication of the shear and excellent corrosion protection
• Does not create foam
• Boron and nitride free

Storage
To be kept under cover. If packages are
kept at the open air, rainwater or moisture
will contaminate the product. Lubricating
oils and greases should not be exposed to
sunlight or at low temperatures (frost).